NST

본문 바로가기 주메뉴 바로가기 서브메뉴 바로가기
PoE Switches

Provides power and data to the connected device simultaneously
and controls the device remotely

NSH-403P

  • UTP Port
    UTP Port
    4FE
  • Optical Port
    Optical Port
    -
  • Management
    Management
    Unmanaged
DATASHEET

The NSH-403P PoE Switch is a Layer 2 product that conforms to the IEEE 802.3af or IEEE 802.3at Power over Ethernet (PoE) standard. Data communication as well as power is provided via Ethernet cable to devices (PD) such as CCTV, WLAN APs and IP telephones that conform to the IEEE 802.3af / at standard. NST's PoE switches automatically detect the load on the connected device (PD) and dynamically supply the power required by that device.


The NSH-403P supports IEEE 802.3af international standard PoE, and its simple and cost-effective features enable flexible and efficient network configuration. The NSH-403GP provides four 10 / 100Mbps ports, including one uplink port and three PoE ports. NSH-403P is a high reliability product designed with safety and reliability first. The reset IC also provides a 100% chance of automatic recovery after a power failure and an electrical failure. NSH-403P is a product suitable for network CCTV and wireless LAN network configuration.

Specifications

Specifications
item Descriptions
Interface 3-Port 10/100Base-TX PoE
1-Port 10/100Base-TX Uplink
Features - PoE IEEE 802.3af Standard
PD(Power Device) Detection
PD Classification
Zero Current Detection
Over Current Protection
Internal MOSFET with Thermal Protection
Auto Restart Fault Management
Precision Inrush Control with Internal Sense Resistor
AC and DC Disconnect Sensing
Robust Short-Circuit Protection
Features IEEE 802.3x Flow Control
Auto MDI/MDIX
Powerful internal constant power circuit enables stable operation even with unstable power input
High pressure ceramic treatment for each port improves surge and EMI characteristics
Power DC 48V 0.5A (외장)
Size 62.5(W) x 138(H) x 24(D) mm
Operating Temperature -20°C ~ 70°C
Storage Temperature -40°C ~ 80°C
LED PWR, Link/ACT, PoE LED
Reset 불안정한 전원 입력 시에도 강력한 내부 정전원회로 동작
Standard IEEE 802.1q, IEEE 802.1d, IEEE 802.1p, IEEE 802.3af
IEEE 802.3, IEEE 802.3u, IEEE 802.3x
PoE Power RJ-45 Pin out : 4/5(+) 7/8(-)
Output Voltage : 48VDC
PoE User Port Power : Max 15.4W
etc. 포트별 고압세라믹 처리로 Surge 및 EMI 특성 개선
Specifications